Like home appliances, which require maintenance to continue operating tasks, water softeners also require maintenance to operate at peak operations. This is especially true because water is constant and runs through the system, and if not cleaned or maintained regularly, it can lead to lead and dust buildup.

Now comes the most common question: how to service a water softener? There are other things which keep your water softener working well. Sometimes regularly checking salt and water levels isn’t enough. Whether you have a new water softener or have a currently working softener, here are some tips you should be aware of

Checking your system’s salt level

Most water softeners can help detect salt in a brine tank, which is used to produce sodium ions and swap the magnesium and calcium ions in a process called ion exchange.

However, if your salt level is too low, you don’t need to perform this; rather, your water will be hard water, leaving white residue on fixtures and skin and making hair feel sticky and dry.

Thankfully, checking salt level is an easy-to-do task and can be performed without the help of a professional 

Here are the steps:

• Locating the brine tank 
• Salt pellets should be high enough to cover visible water in the tank
• If the water is less than half of the tank, refill to halfway
• Before refilling, loosen any salt sticking to the side of the tank.

Cleaning your brine tank regularly

Researchers claim water softeners clean your water tank once a year. Otherwise, salt forms clumps and reduces the effectiveness of the softener’s process. However, depending on the water level of iron, you may need to clean your brine tank more often. 

Cleaning your brine tank, an expert can help you clean your water tank regularly during water softener services every year.

Here are the steps you should know:

• Preparing a place to dump the brine from the tank, like a pit or gravel
• Putting the system in bypass mode
• Unplugging the water softener helps disconnect your brine tank 
• Take the brine tank and dump the content in your prepared gravel or pit 
• After emptying the tank, clean your salt flat in cold water with dish detergent
• Using a long brush or power washer to clean the tank
• Using a quarter cup of bleach with two gallons of cold water
• Scrubbing inside of the tank 
• Whipping tank and drying before reassembling

Eliminating salt bridges

A salt bridge builds up salt residue collecting in the tank of water softener. When salt bridges form, the salt will not dissolve in water to form brine. Without a brine, resin does not generate properly, so water doesn’t get softened. A salt bridge forms high humidity from using low-quality salt.

However, breaking the salt bridge, if they become consistent issues, a water softener helps you identify the underlying cause. If a salt bridge is noticed, there could be an issue when the water softener requires professional assistance.  

Here are the steps you need to follow to eliminate salt bridges:

• Using a broom handle to push into the brine tank
• Using the broom handle to gently break up salt bridges
• Pouring a gallon of warm water into the tank
• Filling the brine tank with less salt to prevent the formation of salt bridges. 

Replacing water softener 

Resin is an essential element used in water-softener operation as it allows ion exchange to take place. Even though resin is used to design and lasts the lifetime of water softener, which is around 10 to 15 years. High levels of iron and chlorine break down faster than usual.

If water softener consumes less salt than regular water but doesn’t produce soft water. Small particles in your water are a good indicator that resin is breaking down.

Moreover, softener resin can help you assist; with the help of an expert, you will be able to do this faster. Furthermore, Suncoast water treatment will help you and answer all your doubts on how to service a water softener. 

Here are some steps you need to follow in order to replace with water softener:

• Determining the amount of resin you need to follow
• Placing the system to bypass and unplugging the power card
• Disconnecting plumbing and removing the control head
• Laying the softener tank inside or in the trash can
• Using a garden hose to buy expired resin
• Standing the tank upright and covering the opening of the product tube
• Refilling the gravel 
• Uncovering product tubes
• Reattaching control head
• Placing the system in service mode.

Using the right type of salt 

Only high types of salt are designed for such use. However, other types of salt will have a higher level of impurities, building up clogs in your system. High-purity slats cots more types of salt, as the investment is worth to protect the longevity of your water softener

There are several types of compatible salts for your water softener, but make sure to compare different types of water softener.

Adding  a prefilter

If your water has sediments like iron, clay, or other materials found in well water in certain areas throughout the country. Your water softener removes the contaminants from water. It remains effective for six to nine months before needing a replacement. 

Moreover, a water softener will create a prefilter when your system is installed. However, if you have considerable skills, adding a prefilter should be done by a professional who can install a softener and answer all your doubts and questions about how to service a water softener. 

Conclusion 

In conclusion, water softener issues are considered best left to professionals, where regular professionals will help you reduce issues to system-prepare what soft water you might need. To learn more on how to service a water softener, visit Suncoast Water Treatment. If you need help with water softener issues you can contact for help with your water softener and issues related to it.